Be Kind! Share with your Team, with your Family, with your Buddies!
Click The Button Now & Like This On Your Facebook Page!
Monday, June 10, 2013
Placing GPS Devices - How to Mount A GPS Tracking System
The real method of setting up the said GPS tracker on a vehicle, however, is a different factor altogether.
Now before something else is said and carried out, it is extremely selected that you deliver your car or bike to an auto store that is capable of placing electronic items. These people know how to hook a great deal of things up to your car without messing around with the important wires.
If you are confident enough in your DIY capabilities, then here is a quick set of measures to assist you set up GPS devices on your car or bike:
Prepare The Right Resources
Prepare these ahead of time:
1. GPS navigation kit
2. Digital Multi Meter
3. Phillips and flathead screwdrivers
4. Ratchet set
5. Handheld drill
6. Wire stripper, crimper and cutter
7. Solder and soldering iron
8. Tapping screws and ring terminals
9. Electrical tape
Analyze The Wiring Diagram Of Your Car
You can get the wiring diagram on your owner's guide. If you no longer possess the guide, you need only determine take note of the vehicle's model and go to your seller. You can also use search engines like Google or Bing to check a digital copy of the wiring diagram. Why doing so? This diagram will tell you what wires you can employ to power your auto GPS system without ruining your car or bike.
Check The Wiring
Employ the wiring diagram as a reference point from here on out. Remove the wire panels on your car or bike with your tools and check each wire with a multimeter to see if it is live or not. Wrap the wires with electrical tape at typical intervals to stop the wires from getting all mixed up.
Set up The Tracker On An Inconspicuous Area
GPS devices must be installed on the much more overlooked places of the bike. If you are mounting impressive GPS devices on a bike, just beneath the metal body of the bike or inside the handlebars are great hiding spots. A car has a great deal of concealing areas, like inside the driver's seat or right beneath the chassis of the car. The critical factor to never forget is that the auto GPS tracker itself must not easily be seen by a casual look of the car.
Wire The Relays
This is the portion in which you solder and tape up the connections. Be sure that no wire is left bared or you might end up shorting the electrical systems of your car. Meticulously reorganize all the wires when the wiring is finished, close up the wiring panel and check car GPS system to see if it works.
The method will change based on the certain development of your car or bike, but this standard manual must be adequate to assist you set up GPS devices on cars and bikes alike. Keep in mind that there is no shame in turning a professional for help - even if it is just suggestions on how to install an on-board GPS tracker!